│ │ │ - autotrace
│ │ │ - Ps2ai
│ │ │ @@ -749,63 +749,86 @@
│ │ │ - any device that Ghostscript provides - use gs:format, e.g. gs:pdfwrite.
│ │ │
│ │ │ - ps2ai:
│ │ │ - Adobe Illustrator via ps2ai.ps of Ghostscript.
│ │ │
│ │ │
│ │ │ No format specific options
│ │ │ -
│ │ │ +
│ │ │
│ │ │ -This driver uses the C++ API of ImageMagick or GraphicsMagick to finally produce different output formats. The output format is determined automatically by Image-/GraphicsMagick based on the suffix of the output filename. So an output file test.png will force the creation of an image in PNG format. This binary of pstoedit was compiled against version 6.9.11 of ImageMagick.
│ │ │ -
│ │ │ -No format specific options
│ │ │ -
│ │ │ -
│ │ │ -The following format specific options are available:
│ │ │ +This group consists of the following variants:
│ │ │
│ │ │ -- [-m]
│ │ │ -
│ │ │ --
│ │ │ -map to Arial
│ │ │ -
│ │ │ +
- gmfa:
│ │ │ +- ASCII GNU metafile .
│ │ │
│ │ │ -- [-nf]
│ │ │ -
│ │ │ --
│ │ │ -emulate narrow fonts
│ │ │ -
│ │ │ +
- gmfb:
│ │ │ +- binary GNU metafile .
│ │ │
│ │ │ -- [-drawbb]
│ │ │ -
│ │ │ --
│ │ │ -draw bounding box
│ │ │ -
│ │ │ +
- plot:
│ │ │ +- GNU libplot output types, e.g. plot:-plotformat X.
│ │ │
│ │ │ -- [-p]
│ │ │ +
- plot-pnm:
│ │ │ + - pnm via GNU libplot.
│ │ │ +
│ │ │ +- plot-cgm:
│ │ │ +- cgm via GNU libplot.
│ │ │ +
│ │ │ +- plot-ai:
│ │ │ +- ai via GNU libplot.
│ │ │ +
│ │ │ +- plot-svg:
│ │ │ +- svg via GNU libplot.
│ │ │ +
│ │ │ +- plot-ps:
│ │ │ +- ps via GNU libplot.
│ │ │ +
│ │ │ +- plot-fig:
│ │ │ +- fig via GNU libplot.
│ │ │ +
│ │ │ +- plot-pcl:
│ │ │ +- pcl via GNU libplot.
│ │ │ +
│ │ │ +- plot-hpgl:
│ │ │ +- hpgl via GNU libplot.
│ │ │ +
│ │ │ +- plot-tek:
│ │ │ +- tek via GNU libplot.
│ │ │ +
│ │ │ +
│ │ │ +The following format specific options are available:
│ │ │ +
│ │ │ +- [-plotformat string]
│ │ │
│ │ │ -
│ │ │ -prune line ends
│ │ │ +plotutil format to generate
│ │ │
│ │ │
│ │ │ -- [-nfw]
│ │ │ +
│ │ │ +
│ │ │ +
│ │ │ +This is the format used internally by Microsoft PowerPoint. LibreOffice can also read/write PowerPoint files albeit with some lack of functionality.
│ │ │ +
│ │ │ +The following format specific options are available:
│ │ │ +
│ │ │ +- [-colors string]
│ │ │
│ │ │ -
│ │ │ -Newer versions of MS Windows (2000, XP, Vista, 7, ...) will not accept WMF/EMF files generated when this option is set and the input contains text. But if this option is not set, then the WMF/EMF driver will estimate interletter spacing of text using a very coarse heuristic. This may result in ugly looking output. On the other hand, OpenOffice can still read EMF/WMF files where pstoedit delegates the calculation of the inter letter spacing to the program reading the WMF/EMF file. So if the generated WMF/EMF file shall never be processed under MS Windows, use this option. If WMF/EMF files with high precision text need to be generated under *nix the only option is to use the -pta option of pstoedit. However that causes every text to be split into single characters which makes the text hard to edit afterwards. Hence the -nfw option provides a sort of compromise between portability and nice to edit but still nice looking text. Again - this option has no meaning when pstoedit is executed under MS Windows anyway. In that case the output is portable but nevertheless not split and still looks fine.
│ │ │ +"original" to retain original colors (default), "theme" to convert randomly to theme colors, or "theme-lum" also to vary luminance
│ │ │
│ │ │
│ │ │ -- [-winbb]
│ │ │ +
- [-fonts string]
│ │ │
│ │ │ -
│ │ │ -let the MS Windows API calculate the Bounding Box (MS Windows only)
│ │ │ +use "windows" fonts (default), "native" fonts, or convert to the "theme" font
│ │ │
│ │ │
│ │ │ -- [-OO]
│ │ │ +
- [-embed string]
│ │ │
│ │ │ -
│ │ │ -generate OpenOffice compatible EMF file
│ │ │ +embed fonts, specified as a comma-separated list of EOT-format font files
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │ See also: http://linuxcnc.org/
│ │ │
│ │ │ @@ -1415,89 +1438,66 @@
│ │ │
- [-sampleoption integer]
│ │ │
│ │ │ -
│ │ │ just an example
│ │ │
│ │ │
│ │ │
│ │ │ -
│ │ │ +
│ │ │
│ │ │ -This is the format used internally by Microsoft PowerPoint. LibreOffice can also read/write PowerPoint files albeit with some lack of functionality.
│ │ │ -
│ │ │ The following format specific options are available:
│ │ │
│ │ │ -- [-colors string]
│ │ │ +
- [-m]
│ │ │
│ │ │ -
│ │ │ -"original" to retain original colors (default), "theme" to convert randomly to theme colors, or "theme-lum" also to vary luminance
│ │ │ +map to Arial
│ │ │
│ │ │
│ │ │ -- [-fonts string]
│ │ │ +
- [-nf]
│ │ │
│ │ │ -
│ │ │ -use "windows" fonts (default), "native" fonts, or convert to the "theme" font
│ │ │ +emulate narrow fonts
│ │ │
│ │ │
│ │ │ -- [-embed string]
│ │ │ +
- [-drawbb]
│ │ │
│ │ │ -
│ │ │ -embed fonts, specified as a comma-separated list of EOT-format font files
│ │ │ +draw bounding box
│ │ │
│ │ │
│ │ │ -
│ │ │ -
│ │ │ -
│ │ │ -This group consists of the following variants:
│ │ │ -
│ │ │ -- gmfa:
│ │ │ -- ASCII GNU metafile .
│ │ │ -
│ │ │ -- gmfb:
│ │ │ -- binary GNU metafile .
│ │ │ -
│ │ │ -- plot:
│ │ │ -- GNU libplot output types, e.g. plot:-plotformat X.
│ │ │ -
│ │ │ -- plot-pnm:
│ │ │ -- pnm via GNU libplot.
│ │ │ -
│ │ │ -- plot-cgm:
│ │ │ -- cgm via GNU libplot.
│ │ │ -
│ │ │ -- plot-ai:
│ │ │ -- ai via GNU libplot.
│ │ │ -
│ │ │ -- plot-svg:
│ │ │ -- svg via GNU libplot.
│ │ │ -
│ │ │ -- plot-ps:
│ │ │ -- ps via GNU libplot.
│ │ │ -
│ │ │ -- plot-fig:
│ │ │ -- fig via GNU libplot.
│ │ │ -
│ │ │ -- plot-pcl:
│ │ │ -- pcl via GNU libplot.
│ │ │ +
- [-p]
│ │ │ +
│ │ │ +-
│ │ │ +prune line ends
│ │ │ +
│ │ │
│ │ │ -- plot-hpgl:
│ │ │ -- hpgl via GNU libplot.
│ │ │ +
- [-nfw]
│ │ │ +
│ │ │ +-
│ │ │ +Newer versions of MS Windows (2000, XP, Vista, 7, ...) will not accept WMF/EMF files generated when this option is set and the input contains text. But if this option is not set, then the WMF/EMF driver will estimate interletter spacing of text using a very coarse heuristic. This may result in ugly looking output. On the other hand, OpenOffice can still read EMF/WMF files where pstoedit delegates the calculation of the inter letter spacing to the program reading the WMF/EMF file. So if the generated WMF/EMF file shall never be processed under MS Windows, use this option. If WMF/EMF files with high precision text need to be generated under *nix the only option is to use the -pta option of pstoedit. However that causes every text to be split into single characters which makes the text hard to edit afterwards. Hence the -nfw option provides a sort of compromise between portability and nice to edit but still nice looking text. Again - this option has no meaning when pstoedit is executed under MS Windows anyway. In that case the output is portable but nevertheless not split and still looks fine.
│ │ │ +
│ │ │
│ │ │ -- plot-tek:
│ │ │ -- tek via GNU libplot.
│ │ │ +
- [-winbb]
│ │ │ +
│ │ │ +-
│ │ │ +let the MS Windows API calculate the Bounding Box (MS Windows only)
│ │ │ +
│ │ │
│ │ │ -
│ │ │ -The following format specific options are available:
│ │ │ -
│ │ │ -- [-plotformat string]
│ │ │ +
- [-OO]
│ │ │
│ │ │ -
│ │ │ -plotutil format to generate
│ │ │ +generate OpenOffice compatible EMF file
│ │ │
│ │ │
│ │ │
│ │ │ +
│ │ │ +
│ │ │ +This driver uses the C++ API of ImageMagick or GraphicsMagick to finally produce different output formats. The output format is determined automatically by Image-/GraphicsMagick based on the suffix of the output filename. So an output file test.png will force the creation of an image in PNG format. This binary of pstoedit was compiled against version 6.9.11 of ImageMagick.
│ │ │ +
│ │ │ +No format specific options
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │
│ │ ├── ./usr/share/doc/pstoedit/pstoedit.pdf
│ │ │ ├── pdftotext {} -
│ │ │ │ @@ -1,10 +1,10 @@
│ │ │ │ PSTOEDIT
│ │ │ │ Dr. Wolfgang Glunz
│ │ │ │ -September 4, 2021
│ │ │ │ +October 31, 2021
│ │ │ │ Version 3.77
│ │ │ │
│ │ │ │ Abstract
│ │ │ │ pstoedit - a tool converting PostScript and PDF files into various vector
│ │ │ │ graphic formats
│ │ │ │
│ │ │ │ 1
│ │ │ │ @@ -449,57 +449,48 @@
│ │ │ │ debug: for test purposes.
│ │ │ │ dump: for test purposes (same as debug).
│ │ │ │ gs: any device that Ghostscript provides - use gs:format, e.g. gs:pdfwrite.
│ │ │ │ ps2ai: Adobe Illustrator via ps2ai.ps of Ghostscript.
│ │ │ │ No format specific options
│ │ │ │ 4.0.2
│ │ │ │
│ │ │ │ -magick - MAGICK driver compatible with version 6.9.11 of
│ │ │ │ -ImageMagick.
│ │ │ │ -
│ │ │ │ -This driver uses the C++ API of ImageMagick or GraphicsMagick to finally
│ │ │ │ -produce different output formats. The output format is determined automatically by Image-/GraphicsMagick based on the suffix of the output filename. So
│ │ │ │ -an output file test.png will force the creation of an image in PNG format. This
│ │ │ │ -binary of pstoedit was compiled against version 6.9.11 of ImageMagick.
│ │ │ │ -No format specific options
│ │ │ │ +Format group: gmfa gmfb plot plot-pnm plot-cgm plot-ai plotsvg plot-ps plot-fig plot-pcl plot-hpgl plot-tek
│ │ │ │
│ │ │ │ +This group consists of the following variants:
│ │ │ │ +gmfa: ASCII GNU metafile .
│ │ │ │ +gmfb: binary GNU metafile .
│ │ │ │ +plot: GNU libplot output types, e.g. plot:-plotformat X.
│ │ │ │ +plot-pnm: pnm via GNU libplot.
│ │ │ │ +plot-cgm: cgm via GNU libplot.
│ │ │ │ 9
│ │ │ │
│ │ │ │ 4
│ │ │ │
│ │ │ │ -4.0.3
│ │ │ │ -
│ │ │ │ AVAILABLE FORMATS AND THEIR SPECIFIC OPTIONS
│ │ │ │
│ │ │ │ -emf - Enhanced MS Windows Metafile
│ │ │ │ +plot-ai: ai via GNU libplot.
│ │ │ │ +plot-svg: svg via GNU libplot.
│ │ │ │ +plot-ps: ps via GNU libplot.
│ │ │ │ +plot-fig: fig via GNU libplot.
│ │ │ │ +plot-pcl: pcl via GNU libplot.
│ │ │ │ +plot-hpgl: hpgl via GNU libplot.
│ │ │ │ +plot-tek: tek via GNU libplot.
│ │ │ │ +The following format specific options are available:
│ │ │ │ +[-plotformat string ] plotutil format to generate
│ │ │ │ +4.0.3
│ │ │ │ +
│ │ │ │ +pptx - PresentationML (PowerPoint) format
│ │ │ │
│ │ │ │ +This is the format used internally by Microsoft PowerPoint. LibreOffice can
│ │ │ │ +also read/write PowerPoint files albeit with some lack of functionality.
│ │ │ │ The following format specific options are available:
│ │ │ │ -[-m] map to Arial
│ │ │ │ -[-nf ] emulate narrow fonts
│ │ │ │ -[-drawbb] draw bounding box
│ │ │ │ -[-p] prune line ends
│ │ │ │ -[-nfw] Newer versions of MS Windows (2000, XP, Vista, 7, ...) will not accept
│ │ │ │ -WMF/EMF files generated when this option is set and the input contains
│ │ │ │ -text. But if this option is not set, then the WMF/EMF driver will estimate
│ │ │ │ -interletter spacing of text using a very coarse heuristic. This may result
│ │ │ │ -in ugly looking output. On the other hand, OpenOffice can still read
│ │ │ │ -EMF/WMF files where pstoedit delegates the calculation of the inter letter
│ │ │ │ -spacing to the program reading the WMF/EMF file. So if the generated
│ │ │ │ -WMF/EMF file shall never be processed under MS Windows, use this
│ │ │ │ -option. If WMF/EMF files with high precision text need to be generated
│ │ │ │ -under *nix the only option is to use the -pta option of pstoedit. However
│ │ │ │ -that causes every text to be split into single characters which makes the
│ │ │ │ -text hard to edit afterwards. Hence the -nfw option provides a sort of
│ │ │ │ -compromise between portability and nice to edit but still nice looking
│ │ │ │ -text. Again - this option has no meaning when pstoedit is executed under
│ │ │ │ -MS Windows anyway. In that case the output is portable but nevertheless
│ │ │ │ -not split and still looks fine.
│ │ │ │ -[-winbb] let the MS Windows API calculate the Bounding Box (MS Windows
│ │ │ │ -only)
│ │ │ │ -[-OO] generate OpenOffice compatible EMF file
│ │ │ │ +[-colors string ] ”original” to retain original colors (default), ”theme” to convert randomly to theme colors, or ”theme-lum” also to vary luminance
│ │ │ │ +[-fonts string ] use ”windows” fonts (default), ”native” fonts, or convert to the
│ │ │ │ +”theme” font
│ │ │ │ +[-embed string ] embed fonts, specified as a comma-separated list of EOTformat font files
│ │ │ │ 4.0.4
│ │ │ │
│ │ │ │ gcode - emc2 gcode format
│ │ │ │
│ │ │ │ See also: http://linuxcnc.org/
│ │ │ │ No format specific options
│ │ │ │ 4.0.5
│ │ │ │ @@ -513,14 +504,15 @@
│ │ │ │ [-header string ] sets the output file name for the generated C header file. e.g.
│ │ │ │ myfig.h
│ │ │ │ 4.0.6
│ │ │ │
│ │ │ │ lwo - LightWave 3D object format
│ │ │ │
│ │ │ │ No format specific options
│ │ │ │ +
│ │ │ │ 10
│ │ │ │
│ │ │ │ 4
│ │ │ │
│ │ │ │ 4.0.7
│ │ │ │
│ │ │ │ AVAILABLE FORMATS AND THEIR SPECIFIC OPTIONS
│ │ │ │ @@ -830,54 +822,62 @@
│ │ │ │
│ │ │ │ 5
│ │ │ │
│ │ │ │ 4.0.37
│ │ │ │
│ │ │ │ NOTES
│ │ │ │
│ │ │ │ -pptx - PresentationML (PowerPoint) format
│ │ │ │ +emf - Enhanced MS Windows Metafile
│ │ │ │
│ │ │ │ -This is the format used internally by Microsoft PowerPoint. LibreOffice can
│ │ │ │ -also read/write PowerPoint files albeit with some lack of functionality.
│ │ │ │ The following format specific options are available:
│ │ │ │ -[-colors string ] ”original” to retain original colors (default), ”theme” to convert randomly to theme colors, or ”theme-lum” also to vary luminance
│ │ │ │ -[-fonts string ] use ”windows” fonts (default), ”native” fonts, or convert to the
│ │ │ │ -”theme” font
│ │ │ │ -[-embed string ] embed fonts, specified as a comma-separated list of EOTformat font files
│ │ │ │ +[-m] map to Arial
│ │ │ │ +[-nf ] emulate narrow fonts
│ │ │ │ +[-drawbb] draw bounding box
│ │ │ │ +[-p] prune line ends
│ │ │ │ +[-nfw] Newer versions of MS Windows (2000, XP, Vista, 7, ...) will not accept
│ │ │ │ +WMF/EMF files generated when this option is set and the input contains
│ │ │ │ +text. But if this option is not set, then the WMF/EMF driver will estimate
│ │ │ │ +interletter spacing of text using a very coarse heuristic. This may result
│ │ │ │ +in ugly looking output. On the other hand, OpenOffice can still read
│ │ │ │ +EMF/WMF files where pstoedit delegates the calculation of the inter letter
│ │ │ │ +spacing to the program reading the WMF/EMF file. So if the generated
│ │ │ │ +WMF/EMF file shall never be processed under MS Windows, use this
│ │ │ │ +option. If WMF/EMF files with high precision text need to be generated
│ │ │ │ +under *nix the only option is to use the -pta option of pstoedit. However
│ │ │ │ +that causes every text to be split into single characters which makes the
│ │ │ │ +text hard to edit afterwards. Hence the -nfw option provides a sort of
│ │ │ │ +compromise between portability and nice to edit but still nice looking
│ │ │ │ +text. Again - this option has no meaning when pstoedit is executed under
│ │ │ │ +MS Windows anyway. In that case the output is portable but nevertheless
│ │ │ │ +not split and still looks fine.
│ │ │ │ +[-winbb] let the MS Windows API calculate the Bounding Box (MS Windows
│ │ │ │ +only)
│ │ │ │ +[-OO] generate OpenOffice compatible EMF file
│ │ │ │ 4.0.38
│ │ │ │
│ │ │ │ -Format group: gmfa gmfb plot plot-pnm plot-cgm plot-ai
│ │ │ │ -plot-svg plot-ps plot-fig plot-pcl plot-hpgl plot-tek
│ │ │ │ +magick - MAGICK driver compatible with version 6.9.11 of
│ │ │ │ +ImageMagick.
│ │ │ │
│ │ │ │ -This group consists of the following variants:
│ │ │ │ -gmfa: ASCII GNU metafile .
│ │ │ │ -gmfb: binary GNU metafile .
│ │ │ │ -plot: GNU libplot output types, e.g. plot:-plotformat X.
│ │ │ │ -plot-pnm: pnm via GNU libplot.
│ │ │ │ -plot-cgm: cgm via GNU libplot.
│ │ │ │ -plot-ai: ai via GNU libplot.
│ │ │ │ -plot-svg: svg via GNU libplot.
│ │ │ │ -plot-ps: ps via GNU libplot.
│ │ │ │ -plot-fig: fig via GNU libplot.
│ │ │ │ -plot-pcl: pcl via GNU libplot.
│ │ │ │ -plot-hpgl: hpgl via GNU libplot.
│ │ │ │ -plot-tek: tek via GNU libplot.
│ │ │ │ -The following format specific options are available:
│ │ │ │ -[-plotformat string ] plotutil format to generate
│ │ │ │ +This driver uses the C++ API of ImageMagick or GraphicsMagick to finally
│ │ │ │ +produce different output formats. The output format is determined automatically by Image-/GraphicsMagick based on the suffix of the output filename. So
│ │ │ │ +an output file test.png will force the creation of an image in PNG format. This
│ │ │ │ +binary of pstoedit was compiled against version 6.9.11 of ImageMagick.
│ │ │ │ +No format specific options
│ │ │ │
│ │ │ │ 5
│ │ │ │ 5.1
│ │ │ │
│ │ │ │ NOTES
│ │ │ │ autotrace
│ │ │ │
│ │ │ │ pstoedit cooperates with autotrace. Autotrace can now produce a dump file for
│ │ │ │ further processing by pstoedit using the -bo (backend only) option. Autotrace
│ │ │ │ is a program written by a group around Martin Weber and can be found at
│ │ │ │ http://sourceforge.net/projects/autotrace/.
│ │ │ │ +
│ │ │ │ 17
│ │ │ │
│ │ │ │ 5.2
│ │ │ │
│ │ │ │ Ps2ai
│ │ │ │
│ │ │ │ 5.2
│ │ ├── ./usr/share/man/man1/pstoedit.1.gz
│ │ │ ├── pstoedit.1
│ │ │ │ @@ -1,22 +1,22 @@
│ │ │ │ .\" *********************************** start of \input{version.tex}
│ │ │ │ .\" *********************************** end of \input{version.tex}
│ │ │ │ '\" t
│ │ │ │ -.\" Manual page created with latex2man on Sat Sep 4 19:36:28 2021
│ │ │ │ +.\" Manual page created with latex2man on Sun Oct 31 03:01:28 2021
│ │ │ │ .\" NOTE: This file is generated, DO NOT EDIT.
│ │ │ │ .de Vb
│ │ │ │ .ft CW
│ │ │ │ .nf
│ │ │ │ ..
│ │ │ │ .de Ve
│ │ │ │ .ft R
│ │ │ │
│ │ │ │ .fi
│ │ │ │ ..
│ │ │ │ -.TH "PSTOEDIT" "1" "04 September 2021" "Conversion Tools " "Conversion Tools "
│ │ │ │ +.TH "PSTOEDIT" "1" "31 October 2021" "Conversion Tools " "Conversion Tools "
│ │ │ │ .SH NAME
│ │ │ │
│ │ │ │ pstoedit
│ │ │ │ \- a tool converting PostScript and PDF files into various
│ │ │ │ vector graphic formats
│ │ │ │ .PP
│ │ │ │ .SH SYNOPSIS
│ │ │ │ @@ -538,47 +538,73 @@
│ │ │ │ gs:
│ │ │ │ any device that Ghostscript provides \- use gs:format, e.g. gs:pdfwrite.
│ │ │ │ .TP
│ │ │ │ ps2ai:
│ │ │ │ Adobe Illustrator via ps2ai.ps of Ghostscript.
│ │ │ │ .PP
│ │ │ │ No format specific options
│ │ │ │ -.SS magick \- MAGICK driver compatible with version 6.9.11 of ImageMagick.
│ │ │ │ -This driver uses the C++ API of ImageMagick or GraphicsMagick to finally produce different output formats. The output format is determined automatically by Image\-/GraphicsMagick based on the suffix of the output filename. So an output file test.png will force the creation of an image in PNG format. This binary of pstoedit was compiled against version 6.9.11 of ImageMagick.
│ │ │ │ -.PP
│ │ │ │ -No format specific options
│ │ │ │ -.SS emf \- Enhanced MS Windows Metafile
│ │ │ │ -The following format specific options are available:
│ │ │ │ +.SS Format group: gmfa gmfb plot plot\-pnm plot\-cgm plot\-ai plot\-svg plot\-ps plot\-fig plot\-pcl plot\-hpgl plot\-tek
│ │ │ │ +This group consists of the following variants:
│ │ │ │ .TP
│ │ │ │ -[\fB\-m\fP]
│ │ │ │ - map to Arial
│ │ │ │ -.PP
│ │ │ │ +gmfa:
│ │ │ │ +ASCII GNU metafile \&.
│ │ │ │ .TP
│ │ │ │ -[\fB\-nf\fP]
│ │ │ │ - emulate narrow fonts
│ │ │ │ -.PP
│ │ │ │ +gmfb:
│ │ │ │ +binary GNU metafile \&.
│ │ │ │ .TP
│ │ │ │ -[\fB\-drawbb\fP]
│ │ │ │ - draw bounding box
│ │ │ │ +plot:
│ │ │ │ +GNU libplot output types, e.g. plot:\-plotformat X.
│ │ │ │ +.TP
│ │ │ │ +plot\-pnm:
│ │ │ │ +pnm via GNU libplot.
│ │ │ │ +.TP
│ │ │ │ +plot\-cgm:
│ │ │ │ +cgm via GNU libplot.
│ │ │ │ +.TP
│ │ │ │ +plot\-ai:
│ │ │ │ +ai via GNU libplot.
│ │ │ │ +.TP
│ │ │ │ +plot\-svg:
│ │ │ │ +svg via GNU libplot.
│ │ │ │ +.TP
│ │ │ │ +plot\-ps:
│ │ │ │ +ps via GNU libplot.
│ │ │ │ +.TP
│ │ │ │ +plot\-fig:
│ │ │ │ +fig via GNU libplot.
│ │ │ │ +.TP
│ │ │ │ +plot\-pcl:
│ │ │ │ +pcl via GNU libplot.
│ │ │ │ +.TP
│ │ │ │ +plot\-hpgl:
│ │ │ │ +hpgl via GNU libplot.
│ │ │ │ +.TP
│ │ │ │ +plot\-tek:
│ │ │ │ +tek via GNU libplot.
│ │ │ │ .PP
│ │ │ │ +The following format specific options are available:
│ │ │ │ .TP
│ │ │ │ -[\fB\-p\fP]
│ │ │ │ - prune line ends
│ │ │ │ +[\fB\-plotformat\fP\fI string\fP]
│ │ │ │ + plotutil format to generate
│ │ │ │ .PP
│ │ │ │ +.SS pptx \- PresentationML (PowerPoint) format
│ │ │ │ +This is the format used internally by Microsoft PowerPoint. LibreOffice can also read/write PowerPoint files albeit with some lack of functionality.
│ │ │ │ +.PP
│ │ │ │ +The following format specific options are available:
│ │ │ │ .TP
│ │ │ │ -[\fB\-nfw\fP]
│ │ │ │ - Newer versions of MS Windows (2000, XP, Vista, 7, \&.\&.\&.) will not accept WMF/EMF files generated when this option is set and the input contains text. But if this option is not set, then the WMF/EMF driver will estimate interletter spacing of text using a very coarse heuristic. This may result in ugly looking output. On the other hand, OpenOffice can still read EMF/WMF files where pstoedit delegates the calculation of the inter letter spacing to the program reading the WMF/EMF file. So if the generated WMF/EMF file shall never be processed under MS Windows, use this option. If WMF/EMF files with high precision text need to be generated under *nix the only option is to use the \-pta option of pstoedit. However that causes every text to be split into single characters which makes the text hard to edit afterwards. Hence the \-nfw option provides a sort of compromise between portability and nice to edit but still nice looking text. Again \- this option has no meaning when pstoedit is executed under MS Windows anyway. In that case the output is portable but nevertheless not split and still looks fine.
│ │ │ │ +[\fB\-colors\fP\fI string\fP]
│ │ │ │ + "original" to retain original colors (default), "theme" to convert randomly to theme colors, or "theme\-lum" also to vary luminance
│ │ │ │ .PP
│ │ │ │ .TP
│ │ │ │ -[\fB\-winbb\fP]
│ │ │ │ - let the MS Windows API calculate the Bounding Box (MS Windows only)
│ │ │ │ +[\fB\-fonts\fP\fI string\fP]
│ │ │ │ + use "windows" fonts (default), "native" fonts, or convert to the "theme" font
│ │ │ │ .PP
│ │ │ │ .TP
│ │ │ │ -[\fB\-OO\fP]
│ │ │ │ - generate OpenOffice compatible EMF file
│ │ │ │ +[\fB\-embed\fP\fI string\fP]
│ │ │ │ + embed fonts, specified as a comma\-separated list of EOT\-format font files
│ │ │ │ .PP
│ │ │ │ .SS gcode \- emc2 gcode format
│ │ │ │ See also: \fBhttp://linuxcnc.org/\fP
│ │ │ │ .PP
│ │ │ │ No format specific options
│ │ │ │ .SS cairo \- cairo driver
│ │ │ │ generates compilable c code for rendering with cairo
│ │ │ │ @@ -980,75 +1006,50 @@
│ │ │ │ This is a long description for the sample driver
│ │ │ │ .PP
│ │ │ │ The following format specific options are available:
│ │ │ │ .TP
│ │ │ │ [\fB\-sampleoption\fP\fI integer\fP]
│ │ │ │ just an example
│ │ │ │ .PP
│ │ │ │ -.SS pptx \- PresentationML (PowerPoint) format
│ │ │ │ -This is the format used internally by Microsoft PowerPoint. LibreOffice can also read/write PowerPoint files albeit with some lack of functionality.
│ │ │ │ -.PP
│ │ │ │ +.SS emf \- Enhanced MS Windows Metafile
│ │ │ │ The following format specific options are available:
│ │ │ │ .TP
│ │ │ │ -[\fB\-colors\fP\fI string\fP]
│ │ │ │ - "original" to retain original colors (default), "theme" to convert randomly to theme colors, or "theme\-lum" also to vary luminance
│ │ │ │ +[\fB\-m\fP]
│ │ │ │ + map to Arial
│ │ │ │ .PP
│ │ │ │ .TP
│ │ │ │ -[\fB\-fonts\fP\fI string\fP]
│ │ │ │ - use "windows" fonts (default), "native" fonts, or convert to the "theme" font
│ │ │ │ +[\fB\-nf\fP]
│ │ │ │ + emulate narrow fonts
│ │ │ │ .PP
│ │ │ │ .TP
│ │ │ │ -[\fB\-embed\fP\fI string\fP]
│ │ │ │ - embed fonts, specified as a comma\-separated list of EOT\-format font files
│ │ │ │ +[\fB\-drawbb\fP]
│ │ │ │ + draw bounding box
│ │ │ │ .PP
│ │ │ │ -.SS Format group: gmfa gmfb plot plot\-pnm plot\-cgm plot\-ai plot\-svg plot\-ps plot\-fig plot\-pcl plot\-hpgl plot\-tek
│ │ │ │ -This group consists of the following variants:
│ │ │ │ .TP
│ │ │ │ -gmfa:
│ │ │ │ -ASCII GNU metafile \&.
│ │ │ │ -.TP
│ │ │ │ -gmfb:
│ │ │ │ -binary GNU metafile \&.
│ │ │ │ -.TP
│ │ │ │ -plot:
│ │ │ │ -GNU libplot output types, e.g. plot:\-plotformat X.
│ │ │ │ -.TP
│ │ │ │ -plot\-pnm:
│ │ │ │ -pnm via GNU libplot.
│ │ │ │ -.TP
│ │ │ │ -plot\-cgm:
│ │ │ │ -cgm via GNU libplot.
│ │ │ │ -.TP
│ │ │ │ -plot\-ai:
│ │ │ │ -ai via GNU libplot.
│ │ │ │ -.TP
│ │ │ │ -plot\-svg:
│ │ │ │ -svg via GNU libplot.
│ │ │ │ -.TP
│ │ │ │ -plot\-ps:
│ │ │ │ -ps via GNU libplot.
│ │ │ │ -.TP
│ │ │ │ -plot\-fig:
│ │ │ │ -fig via GNU libplot.
│ │ │ │ -.TP
│ │ │ │ -plot\-pcl:
│ │ │ │ -pcl via GNU libplot.
│ │ │ │ +[\fB\-p\fP]
│ │ │ │ + prune line ends
│ │ │ │ +.PP
│ │ │ │ .TP
│ │ │ │ -plot\-hpgl:
│ │ │ │ -hpgl via GNU libplot.
│ │ │ │ +[\fB\-nfw\fP]
│ │ │ │ + Newer versions of MS Windows (2000, XP, Vista, 7, \&.\&.\&.) will not accept WMF/EMF files generated when this option is set and the input contains text. But if this option is not set, then the WMF/EMF driver will estimate interletter spacing of text using a very coarse heuristic. This may result in ugly looking output. On the other hand, OpenOffice can still read EMF/WMF files where pstoedit delegates the calculation of the inter letter spacing to the program reading the WMF/EMF file. So if the generated WMF/EMF file shall never be processed under MS Windows, use this option. If WMF/EMF files with high precision text need to be generated under *nix the only option is to use the \-pta option of pstoedit. However that causes every text to be split into single characters which makes the text hard to edit afterwards. Hence the \-nfw option provides a sort of compromise between portability and nice to edit but still nice looking text. Again \- this option has no meaning when pstoedit is executed under MS Windows anyway. In that case the output is portable but nevertheless not split and still looks fine.
│ │ │ │ +.PP
│ │ │ │ .TP
│ │ │ │ -plot\-tek:
│ │ │ │ -tek via GNU libplot.
│ │ │ │ +[\fB\-winbb\fP]
│ │ │ │ + let the MS Windows API calculate the Bounding Box (MS Windows only)
│ │ │ │ .PP
│ │ │ │ -The following format specific options are available:
│ │ │ │ .TP
│ │ │ │ -[\fB\-plotformat\fP\fI string\fP]
│ │ │ │ - plotutil format to generate
│ │ │ │ +[\fB\-OO\fP]
│ │ │ │ + generate OpenOffice compatible EMF file
│ │ │ │ +.PP
│ │ │ │ +.SS magick \- MAGICK driver compatible with version 6.9.11 of ImageMagick.
│ │ │ │ +This driver uses the C++ API of ImageMagick or GraphicsMagick to finally produce different output formats. The output format is determined automatically by Image\-/GraphicsMagick based on the suffix of the output filename. So an output file test.png will force the creation of an image in PNG format. This binary of pstoedit was compiled against version 6.9.11 of ImageMagick.
│ │ │ │ .PP
│ │ │ │ +No format specific options
│ │ │ │ .\" *********************************** end of \input{driverhelp.tex}
│ │ │ │ +.PP
│ │ │ │ .SH NOTES
│ │ │ │
│ │ │ │ .PP
│ │ │ │ .SS AUTOTRACE
│ │ │ │ .PP
│ │ │ │ pstoedit cooperates with autotrace. Autotrace can now produce a dump file
│ │ │ │ for further processing by pstoedit using the \fB\-bo\fP